Development and Evaluation of an Optimized Energy Recovery System from Excess Heat of a Compressed Air System
DOI:
https://doi.org/10.11594/ijmaber.05.04.03Keywords:
Compressed air, Energy efficiency, Energy recovery, Heat recovery, Optimized energy, Waste heatAbstract
The aim of this study is to build a bounded optimized energy recovery system from the compressed air system’s excess heat. It is important to concentrate on the use of products that satisfy the requirements for performance and sustainability, as well as the need for energy that will be optimized. Purposive sampling is used to select the respondents, using quantitative research, specifically both descriptive and developmental methods. The researcher utilized a decision support tool developed by Kolaitis et al., (2020) as the primary research instrument of the study. The adopted tool was slightly modified to suit the assessment needs of the developed energy utilization system. All the main criteria components are interpreted as highly sustainable. The researcher utilized log sheets to determine the performance of the study. Finally, paired t-test was used to determine whether there was a significant difference in the performance of the study. The performance of the optimized energy after the implementation of the project was statistically higher than the performance of the optimized energy before the implementation of the project. The researcher concluded that the performance of the optimized energy recovery system from excess heat of a compressed air system after the installation and operation was effective and efficient based on the ratings of respondents and descriptive measures on the log sheet. For this kind of innovation, the manufacturing company with the same equipment should adopt and sustain it for potential energy savings and protect mother nature.
Downloads
Author Biography
-
Andrew S. Mañego, Graduate School, Bulacan State University, Malolos City, 3000, Philippines
References
Cai, W., Lai, K. H., Liu, C., Wei, F., Ma, M., Jia, S., ... & Lv, L. (2019). Promoting sustainabil-ity of manufacturing industry through the lean energy-saving and emission-reduction strategy. Science of the Total Environment, 665, 23-32.
Dincer, I., & Rosen, M. A. (2021). Thermal en-ergy storage: systems and applications. John Wiley & Sons.
Gao, L., Wang, S., Li, J., & Li, H. (2017). Applica-tion of the extended theory of planned behavior to understand individual’s ener-gy saving behavior in workplac-es. Resources, Conservation and Recy-cling, 127, 107-113.
Hollnagel, E. (2018). Safety–I and safety–II: the past and future of safety management. CRC press.
Https://www.atlascopco.com
Irwin, J. D., & Nelms, R. M. (2020). Basic engi-neering circuit analysis. John Wiley & Sons.
Jouhara, H., Khordehgah, N., Almahmoud, S., Delpech, B., Chauhan, A., & Tassou, S. A. (2018). Waste heat recovery technologies and applications. Thermal Science and Engineering Progress, 6, 268-289
Kolaitis, D., Giannopoulos, D., & Founti, M. (2020). Development of a Decision Sup-port Tool for Sustainability Assessment of Energy Recovery Systems Using Refuse Derived Fuel. In New and Renewable En-ergy Technologies for Sustainable Devel-opment (pp. 55-65). CRC Press.
Kothari, C. (2020). Research methodology methods and techniques.
Lawson, Timothy. (2014). Comparison of the species composition of purse-seine catches determined from logsheets, ob-server data, market data, cannery re-ceipts and port sampling data.
Luo, L., Zhao, J., and Huang, B. (2017). Experi-mental study of enhancing heating per-formance of the air-source heat pump by using a novel heat recovery device de-signed for reusing the energy of the com-pressor shell. Journal of Energy Conver-sion and Management.
Mahmoud, Ayman Elsayed Eltaher (2019). Ar-chitecture Graduate, Standards of Energy Consumption Rationalization in Universi-ty Building in Egypt, Helwan University.
Nallusamy, S., Dinagaraj, G. B., Balakannan, K., & Satheesh, S. (2015). Sustainable green lean manufacturing practices in small scale industries-A case study. International Journal of Applied Engineering Research, 10(62), 143-146.
Pesiridis, Apostolos (2014). Automotive Ex-haust Emmissions and Energy Recovery, Nova Science Publishers, Inc., New York
Power Planning and Development Division PPDD (2019). 2019 Power Situation Re-port by Department of Energy DOE, Elec-tric Power Industry Management Bureau (EPIMB). Website: http://www.doe.gov.ph
Republic Act 11285: Energy Efficiency and Conservation Act, Implementing Rules and Regulations EEC-IRR was signed by President of the Republic of the Philip-pines, Rodrigo Roa Duterte on April 12, 2019.
Roever, Carsten and Phakiti, Aek. (2017). Quantitative Methods for Second Language Research: A Problem-Solving Approach, Routledge.
Sandre-Hernandez, O., Rangel-Magdaleno, J., & Morales-Caporal, R. (2017). A compari-son on finite-set model predictive torque control schemes for PMSMs. IEEE Trans-actions on Power Electronics, 33(10), 8838-8847.
Sapingai, Mohamad Azywan (2017). Develop-ment of Auto Log Sheet Switch for Energy Management.
Sciubba, E., Tocci, L., & Toro, C. (2016). Ther-modynamic Analysis of a Rankine Dual Loop Waste Thermal Energy Recovery System. Energy conversion and manage-ment, 122, 109-118.
Sengupta, S. F., Mohr, J. J., & Slater, S. (2014). Radical product innovation capability: Literature review, synthesis, and illustra-tive research propositions. Journal of product innovation management, 31(3), 552-566.
Struchtrup, Henning (2014). Thermodynamics and Energy Conversion, Springer Heidel-berg New York Dordrecht London.
Warnes, Lionel (2017). Electronic and Electri-cal Engineering Principles and Practice, Third Edition, Palgrave Macmillan, New York: Houndmills, Basingstoke, Hamp-shire RG21 6XS and 175 Fifth Avenue.
Williams, M. D., Rana, N. P., & Dwivedi, Y. K. (2015). The unified theory of acceptance and use of technology (UTAUT): a litera-ture review. Journal of enterprise infor-mation management.
Xu, B., Rathod, D., Yebi, A., Filipi, Z., Onori, S., & Hoffman, M. (2019). A comprehensive review of organic rankine cycle waste heat recovery systems in heavy-duty diesel engine applica-tions. Renewable and Sustainable Energy Reviews, 107, 145-170.
Downloads
Published
Issue
Section
License
Authors who publish with this journal agree to the following terms:
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See the Effect of Open Access).
